Step | Action | Value(s) | Yes | No | ||||
|---|---|---|---|---|---|---|---|---|
Tools Required:
| ||||||||
1 | Were you sent here from the Power Sunroof System Check? | -- | Go to Step 2 | Go to Power Sunroof System Check . | ||||
2 |
Is the voltage equal to the specified value? | B+ | Go to Step 3 | Go to Step 10 | ||||
3 | Measure the voltage from terminal 6 or 12 to terminal 11. Is the voltage equal to the specified value? | B+ | Go to Step 4 | Go to Step 11 | ||||
4 | Test for continuity between terminal 1 and 11 while depressing the slide switch to the open position. Does continuity exist? | -- | Go to Step 5 | Go to Step 12 | ||||
5 | Test for continuity between terminal 3 and 11 while depressing the tilt switch to the Up position. Does continuity exist? | -- | Go to Step 6 | Go to Step 13 | ||||
6 | Test for continuity between terminal 8 and 11. Does continuity exist? | -- | Go to Step 7 | Go to Step 15 | ||||
7 | Test for continuity between terminal 9 and 11. Does continuity exist? | -- | Go to Step 18 | Go to Step 8 | ||||
8 |
Is the voltage equal to the specified value? | B+ | Go to Step 9 | Go to Step 20 | ||||
9 | Replace the sun roof actuator assembly. Refer to Sunroof Actuator Replacement . Is the repair complete? | -- | -- | |||||
10 | Locate and repair the open in the BLK wire between terminal 6 or 12 of the sunroof control module terminal and the accessory power relay. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |||||
11 | Locate and repair the open in the WHT/BLK wire between the sunroof control module terminal 11 and G200. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |||||
12 |
Does continuity exist? | -- | Go to Step 13 | Go to Step 14 | ||||
13 | Replace the sunroof switch assembly. Refer to Sunroof Switch Replacement . Is the repair complete? | -- | -- | |||||
14 | Locate and repair the open in the WHT/BLK wire between the sunroof actuator and G200. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |||||
15 |
Does continuity exist? | -- | Go to Step 16 | Go to Step 17 | ||||
16 | Replace the sunroof actuator assembly. Refer to Sunroof Actuator Replacement Is the repair complete? | -- | -- | |||||
17 | Locate and repair the open in the GRN/ WHT wire between the control module and the actuator assembly. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |||||
18 |
Does continuity exist? | -- | Go to Step 16 | Go to Step 19 | ||||
19 | Locate and repair the open in the RED/BLU wire between the control module and the actuator assembly. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |||||
20 |
Does continuity exist? | -- | Go to Step 21 | Go to Step 23 | ||||
21 | Test for continuity between terminal 5 of the control module connector and terminal 2 of the sunroof actuator connector. Does continuity exist? | -- | Go to Step 22 | Go to Step 24 | ||||
22 | Replace the sunroof control module. Is the repair complete? | -- | -- | |||||
23 | Locate and repair the open in the RED wire between the control module and the actuator assembly. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |||||
24 | Locate and repair the open in the GRN wire between the control module and the actuator assembly. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |||||
