The function of the fuel metering system is deliver the correct amount of fuel to the engine under all operating conditions. Fuel is delivered to each cylinder by the fuel injectors. The fuel injectors are controlled sequentially by the powertrain control module. The powertrain control module bases the control of the fuel injectors on several important engine parameters. These engine parameters include the following:

Determining air density is critical to proper air/fuel management. Air density is primarily derived from the IAT sensor and the MAP sensor inputs. The IAT sensor measures the temperature of the air that is entering the engine. The MAP sensor measures the air pressure in the intake manifold. When the intake manifold pressure increases, the air density in the intake manifold also increases, requiring additional fuel. The information from the IAT sensor and the MAP sensor is used by the PCM to calculate air density and modify fuel injector pulse width.

The fuel metering system consists of the air/fuel delivery system and the electronic control system. For information on the electronic control system refer to Powertrain Control Module Description and Information Sensors/Switches Description.