Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Instrument Cluster Schematics | |||
1 | Did you review the Instrument Panel, Gages and Console Description and Operation and perform the necessary inspections? | Go to Step 2 | |
2 | Verify that the chime is always on. Does the system operate normally? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Test the BLU/BLK wire for an open condition. Is an open condition present? | Go to Step 4 | Go to Step 5 |
4 | Repair the wire. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | Go to Step 10 | -- |
5 | Remove the door jamb switch connector. Does the audible warning remain ON? | Go to Step 7 | Go to Step 6 |
6 | Replace the LH front door jamb switch. Refer to Front Side Door Jamb Switch Replacement in Lighting Systems. Is the repair completed? | Go to Step 10 | -- |
7 |
Does the alarm stop sounding? | Go to Step 8 | Go to Step 9 |
8 | Replace the ignition switch. Refer to Ignition Switch Replacement - On Vehicle in Steering Wheel and Column-Standard. Is the repair complete? | Go to Step 10 | -- |
9 | Replace the multifunction alarm module. Refer to Multifunction Alarm Module Replacement . Is the repair complete? | Go to Step 10 | -- |
10 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
