Removal Procedure
- Disable the SIR system.
Refer to
Disabling the SIR System
.
- Use a flat-bladed tool in order to pry the switch from the instrument
panel.
- Remove the switch from the instrument panel.
- Remove the connector position assurance from the IP module switch
connector.
- Remove the IP module switch electrical connector.
Installation Procedure
- Install the IP module switch electric connector.
- Install the connector position assurance to the IP module switch
connector.
- Install the switch to
the instrument panel.
- Enable the SIR system. Refer to
Enabling the SIR System
.