GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 S10 - Electric 🢒 Steering 🢒 Steering Wheel and Column - Tilt 🢒 Ignition and Key Alarm Switch Assembly - Assemble - Off Vehicle

Ignition and Key Alarm Switch Assembly - Assemble - Off Vehicle Column Shift


    Object Number: 389639 Size: SH
  1. Slide the ignition and key alarm switch assembly (3) into the electronic lock module assembly (1).

    2. Object Number: 306267 Size: SH
  2. Push the key alarm connector (1) into the electronic lock module assembly (2).
  3. Rotate the key alarm connector (1) 90 degrees so that the key alarm connector (1) locks into place.
  4. Install the PASS-KEY® connector into the electronic lock module assembly (2).

    5. Object Number: 306234 Size: SH
  5. Slide the 2 connectors (2) of the turn signal and multifunction switch assembly into the bulkhead connector (1).

    6. Object Number: 415293 Size: SH
  6. Attach the wire harness assembly (1) to the wire harness strap (2).
  7. Install the upper and lower trim covers. Refer to Trim Covers, Shift Lever Seal - Assemble - Off Vehicle .