GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Tracker - 4WD 🢒 Suspension 🢒 Front Suspension 🢒 Front Lower Control Arm Bushing Replacement

Removal Procedure

Tools Required

    • J 35561 Front Control Arm Bushing Service Set
    • J 29792 Front Control Arm Bushing Service Set
    • J 9519-7 Bearing Remover
    • J 9519-17 Bearing Remover
  1. Remove the control arm from the vehicle. Refer to Lower Control Arm Replacement in this section.

    2. Object Number: 173427 Size: SH
  2. Use the J 35561 installer, the J 29792 receiver and a press (1) in order to remove the bushing (2) from the short branch (3) of the control arm.

    3. Object Number: 173429 Size: SH
  3. Use the J 29792 installer, the J 9519-7 , the J 9519-17 and a press (1) in order to remove the bushing from the long branch (2) of the control arm.

Installation Procedure

Tools Required

    • J 35561 Front Control Arm Bushing Service Set
    • J 29792 Front Control Arm Bushing Service Set
    • J 9519-16 Bearing Installer
    • J 9519-9 Bearing Installer

    Object Number: 173441 Size: SH
  1. Use the J 35561 installer, the J 29792 receiver and a press (1) in order to install a new bushing (2) into the short branch (3) of the control arm.

    2. Object Number: 173444 Size: SH
  2. Use the J 29792 installer, the J 9519-9 , the J 9519-16 and a press (1) in order to install a new bushing (3) into the long branch (2) of the control arm.
  3. Install the control arm to the vehicle. Refer to Lower Control Arm Replacement in this section.