GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Tracker - 4WD 🢒 Driveline/Axle 🢒 Front Drive Axle 🢒 Axle Lubricant Change
  1. Raise the vehicle. Support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. If the vehicle is equipped with an engine skid plate, remove the four bolts that hold the skid plate in place. Remove the front skid plate from the vehicle.
  3. Place a drain pan or suitable container under the front axle housing.

    4. Object Number: 174476 Size: SH
  4. Remove the front axle housing oil level/filler plug (1) from the front axle housing.

    5. Object Number: 174476 Size: SH
  5. Remove the front axle housing drain plug (2) from the front axle housing and drain the front axle oil.
  6. Install the front axle housing drain plug (2) into the front axle housing.

    7. Tighten
    Tighten the front axle housing drain plug to 23 N·m (17 lb ft).

  7. Refill the front axle housing with approximately 1 liter (1.8 pt) of 80W-90 GL5 lubricant GM P/N 12345977, or equivalent.
  8. Install the front axle housing oil level/filler plug (1) into the front axle housing.

    9. Tighten
    Tighten the front axle housing oil level/filler plug to 40 N·m (30 lb ft).

  9. If the vehicle is equipped with an engine skid plate, install the front skid plate to the vehicle. Secure the skid plate with four bolts.

    10. Tighten
    Tighten the front skid plate bolts to 54 N·m (40 lb ft).

  10. Remove the drain pan from under the front axle housing.
  11. Lower the vehicle.