For 1990-2009 cars only
- Remove two screws, two plastic retainers and the rear console box from the floor.
- Remove two screws, two plastic retainers and the front console box from the floor.
- Remove one screw and the gearshift control lever knob (1) from the gearshift control lever.
- Remove eight screws, the boot cover and the gearshift control lever boot (1) from the gearshift control lever.
- Remove one clamp and the gearshift lever case boot from the gear shift lever case.
- Remove the gearshift control lever (1) from the gearshift lever case (2) by pushing down on the gearshift control lever pivot (3) and turning counterclockwise 90 degrees (1/4 turn) and lifting up.
- Inspect the gearshift control lever for distortion or excessive wear. Replace as necessary.
- Inspect the gearshift control lever boot and the gearshift lever case cover boot for tears or other damage. Replace as necessary.
Installation Procedure
- Install the gearshift control lever into the gearshift lever case by pushing down on the shift control lever pivot and turning clockwise 90 degrees (1/4 turn) and releasing.
- Install the gearshift lever case boot to the gearshift lever case. Secure the boot with one clamp.
- Install the gearshift control lever boot (1) and the boot cover onto the gearshift control lever (2). Secure the boot and the cover with eight screws.
- Install the gearshift control lever knob (1) onto gearshift control lever. Secure the knob with one screw.
- Install the front console box to the floor. Secure the front console box with two plastic retainers and two screws.
- Install the rear console box to the floor. Secure the rear console box with two plastic retainers and two screws.
