GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Tracker - 4WD 🢒 Brakes 🢒 Drum Brakes 🢒 Brake Backing Plate Replacement

Removal Procedure
  1. Remove the wheel cylinder. Refer to Wheel Cylinder Replacement .

    2. Object Number: 172475 Size: SH
  2. Remove the parking brake cable (3) from the backing plate (1) by squeezing the parking brake cable stopper ring (2).
  3. Remove the axle shaft. Refer to Axle Shaft Replacement in Rear Drive Axle.

Installation Procedure
  1. Install the axle shaft. Refer to Axle Shaft Replacement in Rear Drive Axle.

    2. Object Number: 172475 Size: SH
  2. Install the parking brake (3) to the backing plate (1).
  3. Install the wheel cylinder. Refer to Wheel Cylinder Replacement in this section.