Removal Procedure
- Pull the instrument panel compartment out while pushing in the
right and left stoppers.
- Disconnect the A/C compressor control module electrical connector.
- Remove the A/C compressor
control module (2) from the evaporator case (1) by releasing
the 2 lower lock tabs and sliding the compressor control module upward in
order to disengage from the case.
Installation Procedure
- Install the A/C compressor
control module (2) to the evaporator case (1). Slide
the compressor control module downward and snap the compressor control module
into place.
- Connect the A/C compressor control module electrical connector.
- Close the instrument panel compartment.