For 1990-2009 cars only
Removal Procedure
- Remove the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gauges and Console.
- Release the retaining tab on the bottom of the rear wiper/washer switch by pushing it up with a pick.
- Slide out the rear wiper/washer switch from the instrument panel.
- Disconnect the electrical connector from the rear wiper/washer switch.
- Remove the rear wiper/washer switch from the vehicle.
Installation Procedure
- Connect the electrical connector to the rear wiper/washer switch.
- Install the rear wiper/washer switch to the instrument panel. Ensure that the retaining tabs are fully engaged.
- Install the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gauges and Console.
