Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform Instrument Cluster System Check? | -- | Go to Step 2 | |
2 | Disconnect the fuel level sensor connector. Does the fuel gauge indicate E? | -- | Go to Step 3 | Go to Step 4 |
3 | Replace the fuel level sensor. Is the repair complete? | -- | -- | |
4 |
Is the resistance equal to the specified value? | ∞ | Go to Step 6 | Go to Step 5 |
5 | Repair the short to ground in the YEL/RED wire between the instrument panel cluster assembly and the fuel level sensor. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
6 | Inspect the instrument panel cluster printed circuit for cracks and bad connections. Do any cracks or bad connections exist? | -- | Go to Step 7 | Go to Step 8 |
7 | Repair the cracks or bad connections in the instrument panel cluster printed circuit. Is the repair complete? | -- | -- | |
8 | Replace the fuel gauge. Refer to Fuel Gage Replacement . Is the repair complete? | -- | -- |
