Did you perform the Instrument Cluster System Check?

--

Go to Step 2

Go to Instrument Cluster System Check

1. Disconnect the oil pressure switch connector.
2. Connect a J 36169-A fused jumper from the oil pressure switch connector to chassis ground.

Does the oil pressure indicator light?

--

Go to Step 3

Go to Step 4

Replace the oil pressure switch.

Is the repair complete?

--

Go to Instrument Cluster System Check

--

1. Disconnect the instrument panel cluster assembly connector C1.
2. Connect a J 39200 digital multimeter from the connector C1 cavity 1 to chassis ground.
3. Measure the resistance.

Is the resistance greater than the specified value?

0.5 ohms

Go to Step 5

Go to Step 6

Repair the open in the YEL/BLK wire between the instrument panel cluster assembly and the oil pressure switch. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Instrument Cluster System Check

--

Repair or replace the instrument panel cluster printed circuit.

Is the repair complete?

--

Go to Instrument Cluster System Check

--