For 1990-2009 cars only
Removal Procedure
- Remove the 2 front plastic retaining clips from the parking brake lever bezel.
- Remove the 2 rear screws.
- Lift the parking brake bezel.
- Disconnect the 2 electrical connectors, if equipped with power windows.
- Remove the parking brake bezel from the vehicle.
- Remove the power window switches from the parking brake lever bezel by squeezing the tabs on the back side of the switches, if required.
Installation Procedure
- Install the power window switches to the parking brake lever bezel by pushing the switches into place, if removed.
- Connect the power window electrical connectors, if equipped.
- Install the parking brake lever bezel to the vehicle. Secure the bezel with the 2 screws and the 2 plastic retaining clips.
