For 1990-2009 cars only
Removal Procedure
- Pull the windshield reveal molding (1) away from the windshield (5).
- Remove the reveal molding (1) from the vehicle.
Installation Procedure
- Apply a bead of urethane adhesive from the urethane adhesive kit GM P/N 12346284 into the cavity between the windshield (5) and the windshield pillar.
- Install the reveal molding (1) to the vehicle.
- Start from the center of the reveal molding (1) in order to press the reveal molding (1) into place.
Important: Trim the reveal molding, as needed, in order to fit the molding in the cavity between the windshield and the windshield pillar.
