GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Tracker - 4WD 🢒 Body and Accessories 🢒 Doors 🢒 Door Control Module Replacement

Removal Procedure
  1. Remove the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gauges, and Console.

    2. Object Number: 350992 Size: SH
  2. Disconnect the power door lock module electrical connector.
  3. Remove the power door lock module (1) assembly from the IP bracket.

Installation Procedure

    Object Number: 350992 Size: SH
  1. Install the power door lock module (1) to the IP bracket.
  2. Connect the power door lock module electrical connector.
  3. Install the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gauges, and Console.