Removal Procedure
- Remove the 14 plastic interior trim panel retaining
clips which secure the trim panel.
- Remove the rear door interior trim panel (1).
- Pull the water deflector away from the rear door.
- Remove the rear door handle rod (4) from
the rear door lock link (6).
- Remove the lock cylinder control rod (3) from the rear
door lock link (6).
- Remove the lock assembly rod (5) from the rear door lock
link (6).
- Remove the 3 rear door lock link screws.
- Remove the rear door lock link (6) from the rear door.
Installation Procedure
- Install the rear door lock link (6) to the rear door.
- Install the following components to the rear
door lock link:
• | The rear door handle rod (4) |
• | The lock cylinder control rod (3) |
• | The lock assembly rod (5) |
- Inspect the water deflector for tears and holes.
- Repair the water deflector, as needed, using waterproof tape on
either side of the deflector.
- Apply adhesive to the back of the water deflector.
- Install the water deflector to the rear door.
- Install the rear door interior trim panel (1)
to the rear door (2). Secure the trim panel (1) with the 14
retaining clips.