GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 TrailBlazer - 4WD 🢒 Body 🢒 Seats 🢒 Rear Seat Number 2 Cushion Cover and Pad Replacement

Removal Procedure

    Object Number: 824146 Size: SH
  1. Remove the two bolts (2) securing the rear seat cushion assembly (1) to the seat latch rod (3).
  2. Remove the rear seat cushion assembly.

    3. Object Number: 824148 Size: SH
  3. Remove the pull handle assembly (1). Refer to Rear Seat Number 2 Pull Handle Replacement .
  4. Remove the J-strips (2) securing the rear seat cushion cover to the seat cushion panel.
  5. Remove the seat cushion panel from the pad and cover.

    6. Object Number: 824149 Size: SH
  6. Remove the hog rings (1) from the seat cover.

    7. Object Number: 824170 Size: SH
  7. Carefully separate the hook and loop fastener strips (2) holding the cover to the pad.
  8. Remove the hog rings (1).

Installation Procedure

    Object Number: 824170 Size: SH
  1. Install the hog rings (1) securing the seat cover to the pad.
  2. Pull the cover over the pad pressing the hook and loop fastener strips (2) together.

    3. Object Number: 824149 Size: SH
  3. Install the cover flaps to the pad with hog rings (1).

    4. Object Number: 824148 Size: SH
  4. Install the seat cushion panel on the pad and cover.
  5. Install the J-strips (2) securing the seat cushion cover to the seat cushion panel.
  6. Install the pull handle assembly (1). Refer to Rear Seat Number 2 Pull Handle Replacement .

    7. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 824146 Size: SH
  7. Install the rear seat cushion assembly (1) to the seat latch rod (3) with two bolts (2).

    8. Tighten
    Tighten the seat cushion bolts to 11 N·m (97 lb in).