Tools Required

KM-158 Remover/Installer

1. Remove the control arm. Refer to Control Arm Replacement .
2. Remove the split sleeves from the rear control arm bushing.



3. Press off the control arm rear damping bushing using a press and the KM-158  (1).



4. Press out the control arm front damping bushing using a press and the KM-158  (1).

1. Install the control arm front damping bushing using a press and the KM-158  (1).



2. Install the control arm rear damping bushing using a press and the KM-158  (1).



3. Install the split sleeves to the control arm bushing.
4. Install the control arm.