For 1990-2009 cars only
Removal Procedure
- Remove the engine cover. Refer to Engine Cover Replacement.
- Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.
- Disconnect the fuel pressure sensor wiring harness plug (1) from the fuel rail.
- Disconnect the intake air temperature sensor wiring harness plug (3).
- Unclip the wiring harness channel (4) from the 2 brackets (2).
- Remove the intake air temperature sensor bolt (2).
- Remove the intake air temperature sensor (1) from the intake manifold (3).
Installation Procedure
- Install the intake air temperature sensor bolt (2) and tighten to 8 N·m (71 lb in).
- Install the intake air temperature sensor (1) at the intake manifold (3).
- Clip the wiring harness channel (4) at the 2 brackets (2).
- Connect the intake air temperature sensor wiring harness plug (3).
- Connect the fuel pressure sensor wiring harness plug (1) at the fuel rail.
- Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.
- Install the engine cover. Refer to Engine Cover Replacement.
Caution: Refer to Fastener Caution in the Preface section.
