Repair Procedure
- Pressure test the cooling system. Refer to
Cooling System Leak Testing.
Note: If the radiator is leaky, replace it. Refer to
Radiator Replacement.
- Grind the fracture surface (1) with a proper tool.
- Drill a persistent hole in center of the fracture surface, using a
6 mm (0.24 in) drill.
- Install the new radiator mounting pin (2).
• | Install the radiator mounting pin (2) with the bolt (1) |
| Note: The bolt should not be longer than
35 mm (1.38in).
|
Caution: Refer to Fastener Caution in the Preface section.
- Tighten the bolt
xx N·m (xx lb in).