Removal Procedure
- Remove battery. Refer to
Battery Replacement.
- Unclip all wiring harness from battery tray.
- Unclip the engine control module bracket from battery tray.
- Remove the 3 battery tray bolts (1).
- Remove the battery tray (2).
Installation Procedure
- Install the battery tray (3).
Caution: Refer to Fastener Caution in the Preface section.
- Install the 3 battery tray bolts (1) and tighten to
15 N·m (11 lb ft).
- Clip in all wiring harness at the battery tray.
- Install battery. Refer to
Battery Replacement.