Removal Procedure
- Turn on the radio and record all of the customers radio station presets.
- Ensure that all lamps and accessories are turned off.
- Turn the ignition OFF and remove the ignition key.
Warning: Refer to Battery Disconnect Warning in the Preface section.
- Loosen the negative battery cable nut (2).
- Remove the negative battery cable (1) from the battery.
Installation Procedure
- Install the negative battery cable (1) to the battery.
Caution: Refer to Fastener Caution in the Preface section.
- Fastener the negative battery cable nut (2) and tighten the nut to
10 N·m (89 lb in).
- Insert the ignition key and turn the ignition to the ON position.
- Program all of the customer's radio station presets and set the radio clock to the current time.