- Install the intake air pressure and temperature sensor gasket (4).
- Install the intake air pressure and temperature sensor (2).
Caution: Refer to Fastener Caution in the Preface section.
- Install the intake air pressure and temperature sensor bolt (3) and tighten to
8 N·m (71 lb in)
.
- Install the coolant temperature sensor (1) and tighten to
XXXN·m (XXX lb ft)
.
- Install the thermostat (2) to the intake manifold (1).
- Install the thermostat housing gasket (5).
- Install the thermostat housing (3).
- Install the 2 thermostat housing bolts (4) and tighten to
23 N·m (17 lb in)
.