GM Service Manual Online
For 1990-2009 cars only

    Object Number: 2027883  Size: SH
  1. Install the 4 fuel injector brackets (3).
  2. Install the 4 fuel injector bracket bolts (1) and the 4 bolt washers (2).

  3. Object Number: 2027886  Size: SH

    Note: Ensure that the cylinder head surface is clear of oil, grease and old gasket material.

  4. Coat the RTV sealant on the camshaft front/rear bearing cap surface (arrows).

  5. Object Number: 2027882  Size: SH
  6. Install a NEW cylinder head cover gasket (3).
  7. Install the cylinder head cover (1).
  8. Caution: Refer to Fastener Caution in the Preface section.

  9. Install the 8 cylinder head cover bolts (2) and tighten to  12 N·m (107 lb ft).