- Remove the front fender shipping cover. Refer to
Front Fender Shipping Cover Replacement.
Note: Do NOT tighten mounting nut (2) and adjustment screws (1).
- Install
EN 47650-300 adapter
(3) to front compartment rail.
Note: Preset the
EN 47650 frame
off vehicle.
- Preset
EN 47650 frame
| Note: Outer bars of
EN 47650 frame
MUST be arranged parallel.
|
3.1. | Preset width (b) of
EN 47650 frame
|
Specification
1425 mm (56 in)
3.2. | Preset distance (b) of
EN 47650-250 adapters
to outer bars of
EN 47650 frame
. |
Specification
425 mm (17 in)
3.3. | Preset length (c) of
EN 47650 frame
|
Specification
620 mm (25 in)
3.4. | Preset height (d) of
EN 47650-250 adapters
|
Specification
140 mm (5.5 in)
3.5. | Tighten hexagons (1, 2) on both sides |
- With the aid of an assistant install
EN 47650 frame
(1) to the vehicle.
- Tighten rear bolts of
EN 47650 frame
:
5.1. | Insert safety pins (2) through the
EN 47650-250 adapters
and the side bar to prevent movement. |
5.2. | Tighten
EN 47650 frame
|
to
EN 47650-250 adapters
with mounting bolts (1).
5.3. | Tighten mounting nuts (4) and of
EN 47650-250 adapters
. |
5.4. | Tighten adjustment nuts (3, 5) of
EN 47650-250 adapters
. |
- Tighten front side of
EN 47650 frame
:
6.1. | Align the hook (2) with thumb wheel (3) to upper tie bar. |
6.2. | Tighten the hook (2) to upper tie bar, using the thumb wheel (1). |
- Install
EN 47650-050 rail
(2) to
EN 47650 frame
.
Secure
EN 7650-050 rail
(2) with safety pins (3, 4).
Note: Secure chain boxes with hook chains on the outside of engine bride.
- Install
EN 47519 bridge
with the aid of an assistant onto
EN 7650-050 rail
(2).
Secure
EN 47519 bridge
(5) with safety pins (3, 4).