Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section.

Preliminary Procedure

1. Remove the rear side door trim. Refer to Rear Side Door Trim Replacement.
2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement.

1

Rear Side Door Window Regulator Sash Nut (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

2

Rear Side Door Window

Procedure

1. Loosen the window regulator sash nuts.
2. Connect the door trim panel wire connector.

Note: Start the vehicle to ensure maximum power to the window motor. This is required in order to fully seat the window for adjustment.

3. Start the vehicle.
4. Using the power window switch, raise the window to the full up position.
5. Tighten the rear side door window regulator sash nuts.
6. Inspect for proper window operation and a tight seal.
7. Shut off the vehicle.