Removal Procedure
Warning: The transaxle fluid is hot. Caution must be taken to prevent personal injury when the transaxle fluid drains from the transaxle.
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle.
- Remove the clutch and differential housing cover bolts (3).
- Remove the clutch and differential housing cover (2) and allow the transmission to drain completely.
- Remove the clutch and differential housing cover gasket (1).
Installation Procedure
- Install the clutch and differential housing cover gasket (1).
- Install the clutch and differential housing cover (2).
Caution: Refer to Fastener Caution in the Preface section.
- Install the clutch and differential housing cover bolts (3) and tighten to
xx N·m(xx lb ft).
- Remove the transmission oil drain plug (1) and add transmission fluid until it it seeps out of the fluid level check plug hole.
- Install the transmission oil drain plug and tighten to
xx N·m(xx lb in).
- Lower the vehicle.