GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 Captiva 🢒 Body Systems 🢒 Wipers and Washers 🢒 Rear Window Wiper Motor Replacement

Removal Procedure

    Object Number: 1759034 Size: SH
  1. Remove the rear wiper arm. Refer to Rear Window Wiper Arm Replacement .
  2. Remove the liftgate lower trim. Refer to Liftgate Trim Panel Replacement .
  3. Remove the rear wiper motor bolts.
  4. Remove the motor By sliding the pivot shaft out of the rear window grommet.
  5. Disconnect the electrical connector.

Installation Procedure

    Object Number: 1759034 Size: SH
  1. Connect the electrical connector.
  2. Install the rear wiper motor through the rear window grommet.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the wiper motor bolts.

    4. Tighten
    Tighten the bolts to 8 N·m (11 lb ft).

  4. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
  5. Install the rear wiper arm. Refer to Rear Window Wiper Arm Replacement .