GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 Epica 🢒 Transmission/Transaxle 🢒 Automatic Transmission - 6T40/6T45 🢒 Range Selector Lever Cable Bracket Replacement

Removal Procedure


    Object Number: 2009891 Size: SH
  1. Remove the air filter housing.
  2. Disconnect the shift control cable from the selector lever and the control cable bracket.
  3. Remove the shift control cable bracket bolts and the bracket.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 2009892 Size: SH
  1. Install the shift control cable bracket bolts and the bracket.

    2. Tighten
    Tighten the shift control cable bracket bolts to 25 N·m (18 lb ft).

  2. Connect the shift control cable to the selector lever and the control cable bracket.
  3. Install the air filter housing.