GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Holden 🢒 2008 🢒 Epica 🢒 Transmission/Transaxle 🢒 Automatic Transmission - 6T40/6T45 🢒 Input Speed Sensor Replacement

Removal Procedure

    Object Number: 2009941 Size: SH
  1. Remove the control valve body assembly. Refer to Control Valve Body Replacement.
  2. Remove the input speed sensor bolt.
  3. Remove the sensor and seals.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 2009941 Size: SH
  1. Install the input speed sensor, the bolt, and seals (1).

    2. Tighten
    Tighten the input speed sensor bolt to 12 N·m (106 lb in).

  2. Install the control valve body assembly. Refer to Control Valve Body Replacement.