Input Shaft Support Replacement. Holden Epica 2008

For 1990-2009 cars only

Makes 🢒 Holden 🢒 2008 🢒 Epica 🢒 Transmission/Transaxle 🢒 Automatic Transmission - 6T40/6T45 🢒 Input Shaft Support Replacement

Callout

Component Name

3-5 Reverse and 4-5-6 Clutch Fluid Seals (Qty: 4)

Tip

•	Discard the fluid seals. They are not reusable.

•	Refer to 3-5-Reverse and 4-5-6 Clutch Fluid Seal Ring Replacement .

Input Shaft Support Bolts M6 x 50 (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
Tighten to 12 N·m (106 lb in)

Input Shaft Support

Tip
Inspect the support for wear, damage or porosity.