Fuel Pressure Sensor Replacement With CTF

1. Tilt the cab. Refer to Cab Tilting in General Information.



2. Disconnect the electrical connector from the fuel pressure sensor (5).
3. Remove the fuel pressure sensor (5) from the fuel rail.

1. Inspect the sensor for damage.
2. Replace the sensor if the sensor is worn or damaged.
3. Inspect the packing for cracks or leaks.
4. Replace the packing if the packing is worn or damaged.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the fuel pressure sensor (5) into the fuel rail.

Tighten
Tighten the sensor to 20 N·m (15 lb ft).

2. Connect the electrical connector to the fuel pressure sensor (5).
3. Lower the cab.