GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2000 🢒 Isuzu MD Steel Tilt (F Model) 🢒 Engine 🢒 Engine Exhaust 🢒 Tail Pipe Replacement

Removal Procedure

    Object Number: 236572 Size: SH
  1. Remove the clamp.
  2. Remove the tailpipe.
  3. Inspect all of the components for the following conditions:
    4. • Cracks
    • Bends
    • Stripped threads
    • Corrosion
    • Leaks
    • Repair or replace the components, as necessary.

Installation Procedure

    Object Number: 236572 Size: SH

    Important: Install a new tail pipe when you replace the muffler.

  1. Install the tailpipe into the muffler.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the clamp.

    3. Tighten
    Tighten the nuts alternately and uniformly to 24 N·m (18 lb ft).