Tools Required

1. Remove the armature from the compressor.



2. Remove the field coil from the compressor.
3. Remove the felt from the compressor shaft. if equipped.



4. Engage the hook with the shaft seal cover groove.
5. Use the J 33942-B in order to remove the seal shaft cover (if equipped) from the compressor shaft .
6. Use the J 4245 in order to remove the snap ring from the compressor shaft.
7. Use the J 33942-B in order to remove the shaft seal from the compressor shaft by rotating it inside of the seal to engage the seal onto the J 33942-B .
8. Discard the shaft seal.