GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Isuzu
🢒
2000
🢒
Isuzu MD Steel Tilt (F Model)
🢒
HVAC
🢒
Heating, Ventilation and Air Conditioning
🢒 Mode Valve Replacement
Removal Procedure
Remove the assist handle bolts.
Remove the assist handle.
Remove the instrument panel lower trim.
Remove the radio. Refer to
Radio Replacement
in Entertainment.
Disconnect the electrical connectors from the mode actuator and the temperature actuator.
Remove both of the heater cores. Refer to
Heater Core Replacement
.
Remove the evaporator core. Refer to
Evaporator Core Replacement
.
Remove the heater vent module (Right Side).
Remove the heater vent module (Left Side).
Remove the air inlet valves, control rods, and mode valve lever.
Remove the mode valve.
Installation Procedure
Install the mode valve.
Install the air inlet valves, control rods, and mode valve lever.
Install the heater vent module (Right Side).
Install the heater vent module (Left Side).
Install the evaporator core. Refer to
Evaporator Core Replacement
.
Install both of the heater cores. Refer to
Heater Core Replacement
.
Connect the electrical connectors to the mode actuator and the temperature actuator.
Install the radio. Refer to
Radio Replacement
in Entertainment.
Install the instrument panel lower trim.
Install the assist handle.
Install the assist handle bolts.
Tighten
Tighten the bolts to 6 N·m (53 lb in).