GM Service Manual Online
For 1990-2009 cars only

    Object Number: 230319  Size: SH
  1. Install the field coil on the compressor with the clutch coil screw.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the clutch coil lead wire on the clip on top of the compressor front housing.
  4. Tighten
    Tighten the clutch coil screw to 5 N·m (44 lb in).

  5. Install the pulley on the compressor.
  6. Install the armature on the compressor.