GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Isuzu
🢒
2000
🢒
Isuzu MD Steel Tilt (F Model)
🢒
HVAC
🢒
Heating, Ventilation and Air Conditioning
🢒 Air Inlet Actuator Replacement
Removal Procedure
Remove the instrument panel right lower trim.
Remove the air distributor lower duct. Refer to
Air Distributor Duct Replacement
.
Disconnect the electrical connector.
Remove the inlet air actuator control rod and screws.
Remove the inlet air actuator.
Installation Procedure
Install the inlet air actuator.
Install the inlet air actuator control rod and screws.
Tighten
Tighten the inlet air actuator screws to 2 N·m (18 in).
Connect the electrical connector.
Install the air distributor lower duct. Refer to
Air Distributor Duct Replacement
.
Install the instrument panel right lower trim.