GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2000 🢒 Isuzu MD Steel Tilt (F Model) 🢒 Restraints 🢒 Seat Belts 🢒 Seat Belt Replacement - Center

Removal Procedure

    Object Number: 206178 Size: SH
  1. Lift upward on the floor covering in order to remove the passenger side buckle and the center seat belt bolt.
  2. Lift upward on the floor covering in order to remove the passenger side buckle and the center seat belt.

    3. Object Number: 206174 Size: SH
  3. Remove the center seat buckle bolt.
  4. Remove the center seat buckle.

Installation Procedure

    Object Number: 206174 Size: SH
  1. Install the center seat buckle.
  2. Install the center seat buckle bolt.

    3. Object Number: 206178 Size: SH
  3. Install the passenger side buckle and the center seat belt.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the passenger side buckle and the center seat belt bolt.

    5. Tighten

        • Tighten the passenger side buckle and the center seat belt bolt to 49 N·m (36 lb ft).
        • Tighten the center seat buckle bolt to 49 N·m (36 lb ft).