Park Lamps Inoperative - Front. Isuzu Isuzu MD Steel Tilt (F Model) 2000

For 1990-2009 cars only

Makes 🢒 Isuzu 🢒 2000 🢒 Isuzu MD Steel Tilt (F Model) 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Park Lamps Inoperative - Front

Step	Action	Value(s)	Yes	No
1	Disconnect the harness connector C105. Set the headlamp switch to the PARK position. Connect a test lamp between terminal A in the C105 front chassis harness connector and ground. Does the test lamp light?	--	Go to Step 2	Go to Step 3
2	Connect a test lamp between terminals A and D on the C105 front chassis harness connector. Does the test lamp light?	--	Go to Step 4	Go to Step 5
3	Repair the open in CKT 9 (BRN) between S126 and terminal A in the C105 front chassis harness connector. Is the repair complete?	--	System OK	--
4	Disconnect the harness connector from the right front park/turn lamp assembly. Connect a DMM between terminal B in the right front park/turn lamp harness connector and terminal D in the C105 front turn signal harness connector. Does the DMM indicate continuity?	--	Go to Step 6	Go to Step 7
5	Repair the open in CKT 150 (BLK) between G107 and terminal D in the front chassis harness connector C105. Is the repair complete?	--	System OK	--
6	Repair the open in CKT 150 (BLK) between S105 and terminal D in the front turn signal harness connector C105. Is the repair complete?	--	System OK	--
7	Repair the open in CKT 9 (BRN) between S102 and terminal A in the front turn signal harness connector. Is the repair complete?	--	System OK	--