Press the brake pedal.

Do the stoplamps light?

--

Go to Step 2

Go to Step 3

Set the turn signal switch to the right turn position.

Does the right front turn lamp flash?

--

Go to Step 5

Go to Step 4

Refer to Stop Lamps Inoperative - One .

Is the repair complete?

--

System OK

--

1. Keep the turn signal switch in the right turn position.
2. Disconnect the harness connector from the turn/hazard flasher module.
3. Connect a DMM between terminal 8 in the turn/hazard flasher module harness connector and the chassis ground.

Does the DMM indicate continuity?

--

Go to Step 5

Go to Step 6

Replace the turn/hazard flasher module.

Is the repair complete?

--

System OK

--

1. Keep the DMM connected.
2. Disconnect the harness connector C1 from the multifunction switch.
3. Remove the chassis ground connection from the DMM and connect the chassis ground connection to terminal 7 in the multifunction switch harness connector.

Does the DMM indicate continuity

--

Go to Step 7

Go to Step 8

Replace the multifunction switch.

Is the repair complete?

--

System OK

--

Repair the open in CKT 133 (BLU/ORN) between the multifunction switch and the turn/hazard flasher module.

Is the repair complete?

--

System OK

--