Step | Action | Yes | No | ||||
---|---|---|---|---|---|---|---|
Schematic Reference: Exterior Lights Schematics DEFINITION:The right or left turn signal lamps are always illuminated and flashing. | |||||||
1 | Did you review the exterior lighting operation and perform the necessary inspections? | Go to Step 2 | |||||
2 |
Are the turn signal lamps OFF? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 | ||||
3 | Disconnect the turn signal/hazard switch connector C1. Do the turn signal lamps illuminate and flash? | Go to Step 4 | Go to Step 5 | ||||
4 | Test the turn input circuit of the appropriate side for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 7 | Go to Step 6 | ||||
5 | Replace the multifunction switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column - Tilt. Did you correct the complete the replacement? | Go to Step 7 | -- | ||||
6 | Replace the hazard flasher. Did you complete the replacement? | Go to Step 7 | -- | ||||
7 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |