Tools Required

J 29162 Rear Output Shaft Seal Installer.

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the transfer case shield from the vehicle. Refer to Transfer Case Shield Replacement .
3. Remove the rear propeller shaft from the transfer case.

•	For vehicles equipped with the one piece rear propeller shaft, refer to One-Piece Propeller Shaft Replacement in Propeller Shaft.

•	For vehicles equipped with the two piece rear propeller shaft, refer to Two-Piece Propeller Shaft Replacement in Propeller Shaft.

4. Remove the transfer case rear output shaft seal.

1. Install the transfer case rear output shaft seal in the transfer case with your fingers.
2. Using the J XXXXXXX, install the transfer case rear output shaft seal in the transfer case.
3. Install the rear propeller shaft in to the transfer case.

•	For vehicles equipped with the one piece propeller shaft, refer to One-Piece Propeller Shaft Replacement in Propeller Shaft.

•	For vehicles equipped with the two piece propeller shaft, refer to Two-Piece Propeller Shaft Replacement in Propeller Shaft.

•	Check the transfer case fluid level. Refer to Transfer Case Fluid Replacement .

4. Install the transfer case shield to the vehicle. Refer to .
5. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.