Removal Procedure
- Remove the drive axle. Refer to Drive Axle in Drive Axle On Vehicle
Service.
Important : Do not to damage the transmission case cover/case extension when removing
the seal with a screwdriver.
- Remove the drive axle seal. First use a screwdriver to pry outer the
seal from the transmission. Use pliers in order to remove the remaining housing
of drive axle seal from the transmission.
- Inspect the drive axle seal mating surface on the drive axle housing
for corrosion, grooves or nicks.
- Clean the drive axle seal mating surface on the drive axle housing
with crocus cloth.
Installation Procedure
Tools Required
Important: Do not to damage the transmission case cover/case extension when installing
the drive axle seal.
- Install the drive axle seal in the following way:
• | Install the right-hand drive axle seal using the J 39051-1 |
• | Install the left-hand drive axle seal using the J 39051-2 |
- Install the drive axle. Refer to Drive Axle in Drive Axle On-Vehicle
Service.