GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the lower controls assembly. Refer to Lower Controls

  2. Object Number: 97494  Size: SH
  3. Remove 6 bolts and the transmission pressure switch.

Installation Procedure


    Object Number: 97494  Size: SH
  1. Install a new transmission pressure switch and 6 bolts.
  2. Tighten
    Tighten the bolts to 12 N·m (106 lb in).

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the lower controls assembly. Refer to Lower Controls