GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1999 🢒 Aurora 🢒 Engine 🢒 Engine Mechanical - 4.0L 🢒 Oil Level Indicator Tube Replacement

Removal Procedure
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Lower the center air deflector.

    3. Object Number: 52982 Size: SH
  3. Remove the oil level indicator tube retaining bolt.
  4. Remove the oil level indicator and tube.

Installation Procedure

    Object Number: 52982 Size: SH
  1. Install the oil level tube and indicator.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the oil level indicator tube retaining bolt.

    3. Tighten
    Tighten the oil level indicator tube retaining bolt to 10 N·m (89 lb in).

  3. Install the center air deflector.
  4. Lower the vehicle.