Did you perform the Brake Warning System Check?

--

Go to Step 2

Go to Brake Warning System Check

1. Disconnect the body control module.
2. Connect a DMM between the body control module harness connector C2, terminal D3 and ground.
3. Ignition switch in RUN.

Is the measured voltage within the specified range?

10-15V

Go to Step 3

Go to Step 4

Replace the Body Control Module.

Is the replacement complete?

--

Go to Brake Warning System Check

--

Repair open in CKT 33 (TAN/WHT).

Did you complete the repair?

--

Go to Brake Warning System Check

--