Electromagnetic Interference. Oldsmobile Aurora 1999

For 1990-2009 cars only

Makes 🢒 Oldsmobile 🢒 1999 🢒 Aurora 🢒 Brakes 🢒 Antilock Brake System 🢒 Electromagnetic Interference

ABS components are sensitive to Electromagnetic Interference (EMI).

Perform the following checks if an intermittent malfunction is suspected:

•	Check for proper installation of the wiring harnesses resulting from add-on options.

•	Visually inspect the wheel speed sensor and the toothed ring for the following conditions:

•

Looseness

•	Damage (Replace any damaged components)

•	Foreign material accumulation (Remove any foreign material)

•	Proper mounting (Properly attach all of the components).

•

•	Check for proper routing of the front wheel speed sensor wiring near the spark plug wires. Refer to Spark Plug Wire Harness Replacement in Engine Electrical.

•	Use the DMM J 39200 in order to measure the resistance of the spark plug wires.

If the displays J 39200 Infinite or greater than 30,000 ohms for any wire, replace the spark plug wires. Refer to Spark Plug Wire Harness Replacement in Engine Electrical.

•	While test driving the vehicle, monitor the Scan Tool wheel speeds. If any wheel speed drops or becomes erratic, refer to the appropriate wheel speed DTC.