GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1999 🢒 Aurora 🢒 Restraints 🢒 Seat Belts 🢒 Rear Seat Belt Buckle Replacement

Removal Procedure

    Object Number: 160833 Size: SH
  1. Open the doors.
  2. Remove the rear seat cushion bottom. Refer to Rear Seat Cushion Replacement in Seats.
  3. Remove the anchor bolts retaining seat belt buckles.
  4. Remove the seat belt buckle or buckles.

Installation Procedure

    Object Number: 160833 Size: SH
  1. Install the seat belt buckle or buckles.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the anchor bolts.

    3. Tighten
    Tighten the anchor bolts to 35 N·m (26 lb ft).

  3. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement in seats.
  4. Close the doors.