GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1999 🢒 Aurora 🢒 Restraints 🢒 Seat Belts 🢒 Driver or Passenger Seat Belt Buckle Replacement

Removal Procedure

    Object Number: 501194 Size: SH
  1. Remove the seat. Refer to Seat Replacement in Seats.
  2. Remove the seat belt buckle anchor nut (3).
  3. Disconnect the electrical connector.
  4. Remove the seat buckle assembly (2).

Installation Procedure

    Object Number: 501194 Size: SH
  1. Install the seat buckle assembly (2) to the load bar (1).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the seat belt buckle anchor nut (3).

    3. Tighten
    Tighten the seat belt buckle anchor nut to 41 N·m (30 lb ft).

  3. Connect the electrical connector.
  4. Install the seat. Refer to Seat Replacement in Seats.